Changing System Speed Dialing

NEC 2000 w/o Security Code

1. Press the TRF button

2. Press the CNF button

3. Press the * key on the keypad

4. Press the TRF button

5. Press the CNF button

6. Press the # key on the keypad (the CNF, SPKR, FEATURE lamps will be on & “CAT MODE” will be displayed on the LCD)

7. Press the REDIAL button. (“COMMAND=“ will be displayed on the LCD)

8. Press 720 from the keypad to enter a number

Press 721 from the keypad to enter a name (using the code sheet – up to 32 characters long)

Press the RECALL button

9. Press XXX (System Speed Dial Memory Location) from the keypad.

Press the RECALL button

10. Dial number 9,XXXXXXX ( the ‘9’ is for line access, the ‘ ,’ is a pause and is programmed by pressing the TRF button) from the keypad.

Press the CNF button.

11. Press REDIAL to return to step 7 if you want to enter another number. Pick up the receiver and replace to exit program mode if you are done.

Note: If a mistake is made press HOLD to erase the last entry, or press ANS to go back one screen if you have already pressed the RECALL to write the incorrect entry.

Changing System Speed Dialing

NEC 2000 with Security Code

1. Press the TRF button

2. Press the CNF button

3. Press the * key on the keypad

4. Press the TRF button

5. Press the CNF button

6. Press the # key on the keypad (the CNF, SPKR, FEATURE lamps will be on & “CAT MODE” will be displayed on the LCD)

7. Press the REDIAL button. (“COMMAND=“ will be displayed on the LCD)

8. Press 03 from the keypad

9. Press the RECALL button

10. Press 5 from the keypad

11. Press the RECALL button

12. Press 2000 from the keypad

13. Press CNF button

14. Press the REDIAL button. (“COMMAND=“ will be displayed on the LCD)

15. Press 72 from the keypad

Press the RECALL button

16. Press XXX (System Speed Dial Memory Location) from the keypad. Press the RECALL button

17. Dial number 9,XXXXXXX ( the ‘9’ is for line access, the ‘ ,’ is a pause and is programmed by pressing the TRF button) from the keypad.

Press the CNF button.

18. Press REDIAL to return to step 14 if you want to enter another number. Pick up the receiver and replace to exit program mode if you are done.

Note: If a mistake is made press HOLD to erase the last entry, or press ANS to go back one screen if you have already pressed the RECALL to write the incorrect entry.